The Care Hub
Stick It Right
Careful preparation and application help your vinyl labels look their best for longer. Explore material-specific guidance on surface preparation, transfer tape, application and everyday care.

APPLICATION & CARE HUB
Stick It Like a Pro: Step-by-Step
Four simple steps to apply your vinyl label neatly. Always check the material-specific instructions included with your order, as finishes such as glitter and holographic vinyl may need a little extra care.

1
Prepare the Surface
Make sure the surface is clean, smooth and completely dry. Remove any dust, grease or residue before you begin.

2
Burnish the Transfer Tape
Rub firmly over the transfer tape with a scraper or card, then slowly peel the backing away so the label lifts with the tape.

3
Position & Apply
Line up the label, press down from the centre outwards and burnish again to smooth away any air bubbles.

4
Peel & Let It Settle
Peel the transfer tape back slowly at a low angle. Allow the label time to settle before handling or cleaning, following your care card.
APPLICATION & CARE HUB
Label FAQs & Troubleshooting
Peeling, bubbles or a change of plan? Here are a few friendly pointers. Always check the instructions supplied with your specific vinyl, and get in touch if you're unsure.
Why is my label peeling at the edges?
Edges usually lift when the surface wasn't fully clean and dry, or is textured or curved. Clean the area, let it dry completely, then press the label firmly with the transfer tape still on. Avoid touching the adhesive side.
How do I get rid of air bubbles?
Apply from the centre outwards using a scraper or bank card. For a small stubborn bubble, gently push the air towards the nearest edge. Taking your time during application is the best prevention.
The letters won't leave the transfer tape. What should I do?
Rub firmly over the whole design, then peel the tape back slowly at a sharp angle, close to the surface. If a letter lifts, lay the tape back down and rub again before continuing.
Can I remove or move a label later?
Labels can't be repositioned once applied. To remove one, gently lift a corner with a fingernail and peel slowly. Removal results vary by vinyl type and surface, so test an inconspicuous area first.
Are the labels waterproof or dishwasher safe?
We don't make waterproof, dishwasher or food-safe claims. Hand-wash gently and avoid soaking or scrubbing over labels. Care guidance depends on the vinyl you choose, so please ask before ordering if you have a specific use in mind.